删除或更新信息,请邮件至freekaoyan#163.com(#换成@)

新型纽扣式涡喷发动机燃烧室数值模拟

本站小编 Free考研考试/2021-12-21

本文二维码信息
二维码(扫一下试试看!)
新型纽扣式涡喷发动机燃烧室数值模拟
Simulation Calculation of Combustion Chamber for Button Turbojet Engine
投稿时间:2015-12-20
DOI:10.15918/j.tbit1001-0645.2017.04.005
中文关键词:微型涡喷发动机燃烧室稳态燃烧数值模拟
English Keywords:micro millimeter turbojet enginecombustorsteady statenumerical simulation
基金项目:“十一五”民用航天科研预研项目(C2220062202)
作者单位
马红鹏北京理工大学 宇航学院, 北京 100081
方蜀州北京理工大学 宇航学院, 北京 100081
高航北京理工大学 宇航学院, 北京 100081
李腾北京理工大学 宇航学院, 北京 100081
方冠林北京理工大学 宇航学院, 北京 100081
摘要点击次数:1607
全文下载次数:1886
中文摘要:
为了给超微型燃烧室提供数据参考,对设计的某微型燃烧室的稳态燃烧过程进行数值模拟。采用三维建模,入口参数采用等熵数值计算,考虑了湍流化学反应、热辐射等情况,不仅得到燃烧室稳态工作时的速度场、温度场及各组分浓度分布,而且分析了燃料/空气的流动与回流、燃烧效率以及总压恢复系数的情况,并与实验数据进行对比。计算结果可以较为准确地反映燃烧室的实际燃烧情况。结果表明,燃烧室出口速度约为65m/s,出口温度约1000K,仿真与实验数据契合度高,燃烧室结构设计合理。
English Summary:
To provide reference data for ultra-micro combustor, a new type button turbojet engine was designed and simulated in the combustion's steady-state process. The boundary condition of inlet was calculated with isentropic numerical calculation taking into account turbulent chemical reaction, heat radiation, and so on, to get the combustion chamber's steady-state of the velocity, temperature and component concentration distribution, to analyze the fuel/air flow and backflow, combustion efficiency and total pressure recovery coefficient, and to compare with the experimental data. The calculation results can accurately reflect the actual combustion. The results show that, when combustion chamber exit velocity is about 65m/s, outlet temperature is around 1000K, the simulation and experimental data are more similar, combustion chamber structure design is reasonable.
查看全文查看/发表评论下载PDF阅读器
相关话题/北京 宇航 北京理工大学 数据 实验