1、个人简介
　　张朝晖，教授，博士生导师。主要从事先进金属陶瓷复合材料、新型复合陶瓷、纳米材料、放电等离子烧结新材料制备技术等领域的研究工作。学科方向为毁伤与防护材料。为北京市优秀人才支持计划获得者。主持国家自然科学基金、国防973计划专题项目、总装预研、国防科工基础、总装预研基金、国防科技重点实验室基金等科研项目20余项。已发表学术论文100余篇，其中SCI收录50余篇，SCI论文他引超过千次，受国际材料领域顶级综述期刊“international materials reviews”邀请撰写SPS基础理论与应用技术领域的综述文章。主编国家级规划教材1部，撰写国防科技图书出版基金资助专著2部，出版有限元著作6部，著作总印数达10万册。作为第1发明人申请国家、国防发明专利26件，已授权14件。获兵工高校优秀教材一等奖1项（排名第1），获国防科技发明二等奖1项，获Elsevier出版社以及美陶颁发的Top Reviewer（年度最佳审稿人）奖各1项。
　　2、讲授课程
　　主讲材料科学与工程专业本科生课程《液压传动与控制》、《铸造工程基础》、《复合材料》、《专业英语》，硕士研究生课程《弹塑性力学原理》，博士研究生课程《计算材料学》。
　　3、学生培养
　　指导本科生毕业设计35人；培养硕士研究生25人；博士研究生6人；其中1人获得校级优秀研究生干部称号，2人获得国家级奖学金，1人入选辽宁省第六批“百千万人才工程”。
　　4、学术兼职
　　[1] Carbon, Acta Materialia, Scripta Materialia, Composite Science and Technology, Materials & Design, Materials Science and Engineering A, Journal of Alloys and Compound等学术期刊审稿人；
　　[2] JournalofAmericanCeramicSociety客座编辑（ContributingEditor）；
　　[3] 中国机械工程学会模具专业委员会委员；
　　[4] 国家自然科学基金委员会基金项目通讯（网络）评议人；
　　[5] 机械工业出版社社外编辑。
　　5、主要论著
　　[1] 张朝晖 著 《放电等离子烧结技术及其在钛基复合材料制备中的应用》 国防工业出版社 2018
　　[2] 张朝晖 主编 《ANSYS16.1结构分析工程应用及实例解析.第4版》 机械工业出版社 2016
　　[3] 张朝晖 主编 《ANSYS12.0热分析工程应用》 中国铁道出版社 2010
　　[4] 张朝晖 编著 《ANSYS有限元理论与工程应用.2版》 电子工业出版社 2008
　　[5] 王富耻 张朝晖 著 《静液挤压技术》 国防工业出版社 2008
　　[6] 张朝晖 主编 《计算机在材料科学与工程中的应用》 2008 中南大学出版社
　　[7] 张朝晖 蔡玉强 编著 《Pro/ENGINEER野火2版精彩实例教程》 北京大学出版社 2006
　　[8] 张朝晖 姜开宇 赵丹阳 编著 《SolidWorks 2005精彩实例教程》 北京大学出版社 2006
　　[9] 张朝晖 王富耻 王鲁 李树奎 编著 《ANSYS工程应用范例入门与提高》 清华大学出版社 2004
　　6、代表性学术论文
　　[1] Q. Song; S.P. Yin; Z.H.Zhang;Z.Y. Hu. Microstructure and mechanical properties of super-hard B₄C ceramicfabricated by spark plasma sintering with(Ti₃SiC₂+Si) as sintering aid. Ceramics International. 2019, 45: 8790-8797.
　　[2] Z.Y. Hu;Z.H. Zhang;X.W. Cheng.Microstructure evolution and tensile properties of Ti-(Al_xTi_y) core-shell structured particles reinforced aluminum matrix composites after hot-rolling/heat-treatment, Materials Science and Engineering: A, 737 (2018) 90-93.
　　[3] S.P. Yin; Z.H.Zhang; X.W.Cheng. Spark plasma sintering of B₄C-TiB₂-SiC composite ceramics using B₄C,Ti₃SiC₂and Si as starting materials. Ceramics International. 2018, 44: 21626-21632.
　　[4] Q. Song, Z.H.Zhang^*,Z.Y. Hu, X.W.Cheng. Fully dense B₄C ceramics fabricated by spark plasma sintering atrelatively low temperature. Materials Research Express. 2018, 5: 105201.
　　[5] Z.Y. Hu, Z.H.Zhang^*,X.W.Cheng. A rapid route for synthesizing Ti-(Al_xTi_y/UFG Al) core-multishell structured particles reinforced Al matrix composite with promising mechanical properties. Materials Science & Engineering A. 2018, 721:61-64.
　　[6] H. Wang, Z.H.Zhang^*,Z.Y. Hu. Improvement of interfacial interaction and mechanical properties in coppermatrix composites reinforced with copper coated carbon nanotubes. Materials Science & Engineering A. 2018, 715:163-173.
　　[7] H. Wang, Z.H.Zhang^*,Z.Y. Hu. Interface structure and properties of CNTs/Cu composites fabricatedby electroless deposition and spark plasma sintering. Materials Research Express, 2018, 5: 15602.
　　[8] Z.Y.Hu, X.W.Cheng, H.M.Zhang, Z.H.Zhang^*, F.C.Wang. Investigation on the microstructure, room and high temperature mechanical behaviors and strengthening mechanisms of the (TiB+TiC)/TC4 composites. Journal of Alloys and Compounds, 2017, 726:240-253.
　　[9] H. Wang,Z.H.Zhang^*, H.M. Zhang, Z.Y. Hu. Novel synthesizing and characterization of copper matrix composites reinforced with carbon nanotubes. Materials Science & Engineering A, 2017, 696: 80-89.
　　[10] Z.Y.Hu, X.W.Cheng, Z.H.Zhang^*, H.Wang.The influence of defect structures on the mechanical properties of Ti-6Al-4V alloys deformed by high-pressure torsion at ambient temperature. Materials Science and Engineering: A. 2017, 684:1-13.
　　[11]H.Wang,X.W.Cheng, Z.H.Zhang^*, Z.Y.Hu, S.L. Li. Microstructures and mechanical properties of bulk nanocrystalline silver fabricated by spark plasma sintering, Journal of Materials Research. 2016, 31(15):2223-2232.
　　[12]H.Wang,Z.H.Zhang^*, Z.Y.Hu, F.C.Wang. Synergistic strengthening effect of nanocrystalline copper reinforced with carbon nanotubes, Scientific Reports. 2016, 6:26258.
　　[13] F.C.Wang, Z.H.Zhang^*, Y.J.Sun, Z.Y.Hu, E.Korznikova. Rapid and low temperature spark plasma sintering synthesis of novel carbon nanotube reinforced titanium matrix composites, Carbon. 2015,95:396-407.
　　[14] J.F. Lu, Z.H. Zhang^*, Z.F. Liu, F.C. Wang. Sintering Mechanism of Ti-6Al-4V Prepared by SPS. Applied Mechanics and Materials. 2015, 782:97-101.
　　[15] Z.F. Liu, Z.H. Zhang^*, Y.J. Sun, F.C. Wang. Microstructure and Physical Properties of Nanocrystalline Aluminum Consolidated by Spark Plasma Sintering. Applied Mechanics and Materials. 2015, 782:102-106
　　[16] Z.F.Liu, Z.H.Zhang^*, J.F.Lu, F.C.Wang. Effect of sintering temperature on microstructures and mechanical properties of spark plasma sintered nanocrystalline aluminum. Materials & Design. 2014, 64:625-630.
　　[17] Z.F.Liu,Z.H.Zhang^*, F.C.Wang. A novel and rapid route for synthesizing nanocrystalline aluminum. Materials Science and Engineering: A. 2014, 615:320-323.
　　[18]Z. H.Zhang^*, F.C.Wang, Y.D.Wang.The sintering mechanism in spark plasma sintering – Proof of the occurrence of spark discharge. Scripta Materialia. 2014, 81:56-59.
　　[19] W.C. Zhai, Z.H. Zhang^*, F.C. Wang. Effect of Si content on microstructure and properties of Si/Al composites. Transactions of Nonferrous Metals Society of China. 2014, 24(4):982-988.
　　[20]Wei-chen Zhai, Zhao-hui Zhang^*, Fu-chi Wang.Effects of Particle Size on Microstructures and Properties ofSi/Al Composites. Advanced Materials Research. 2014, 873: 361-365.
　　[21]J.F.Lu, Z.H.Zhang^*, F.C.Wang.Microstructure Characteristics and Mechanical Properties of In Situ TiB/Ti Composites Prepared by Arc-melting Technique. Advanced Materials Research. 2014, 881-883:867-871.
　　[22] X.B. Shen,Z.H. Zhang^*, F.C. Wang. Efffect of Spark Plasma Sintering Temperature on Mechanical Properties of In-situ TiB/Ti Composites. Advanced Materials Research. 2014, 881-883:923-926.
　　[23] M.Y. Sun, Z.H. Zhang^*, F.C. Wang. Numerical simulation of stress wave propagation and attenuation at arc-shaped interface inlayered SiC/Al composite. Journal of Beijing Institute of Technology.2013,22(4):557-562.
　　[24] Z.H. Zhang^*, F.C. Wang, S.K. Lee. Finite element analysis and experimental investigation of the hydrostatic extrusion process of deforming two-layer Cu/Al composite. Journal of Beijing Institute of Technology.2013,22(4):544-549.
　　[25] S. Wei, Z.H. Zhang^*, F.C. Wang. Effect of Ti content and sintering temperature on the microstructures and mechanical properties of TiB reinforced titanium composites synthesized by SPS process. Materials Science and Engineering A. 2013, 560(10-11):249-255.
　　[26] Z.H. Zhang^*, X.B. Shen, F.C. Wang. Microstructure characteristics and mechanical properties of TiB/Ti-1.5Fe-2.25Mo composites synthesized in situ using SPS process. Transactions of Nonferrous Metals Society of China. 2013, 23(9):2958-2604.
　　[27] Z.H. Zhang*, X.B. Shen, F.C. Wang. A new rapid route to in-situ synthesize TiB-Ti system functionally graded materials using spark plasma sintering method. Materials Science and Engineering A. 2013, 565:326-332.
　　[28] Z.H. Zhang*, L. Qi, X.B. Shen, F.C. Wang. Microstructure and mechanical properties of bulk carbon nanotubes compacted by spark plasma sintering. Materials Science and Engineering A. 2013, 573: 12-17.
　　7、联系方式
　　电话：010 - ** - 211；E-mail：zhang@bit.edu.cn