崔利荣
一、基本信息
姓名：崔利荣
性别：男
出生日期：1960年12月
民族：汉
职称：教授
学位：博士学位
研究方向：质量与可靠性、随机建模、
风险管理
主讲课程：系统可靠性理论与方法、
随机过程、高等概率与数理统计、质量管理
联系电话：**
电子邮件：Lirongcui@bit.edu.cn
通信地址：北京理工大学管理与经济学院（北京：100081）
二、教育经历
1979-1983， 天津工业大学纺织系，本科，纺织工程针织专业
1983-1986， 中国科学院系统科学研究所， 硕士， 运筹学与控制论专业
1992-1994， 英国威尔士大学Swansea学院， 博士， 概率论与数理统计专业
三、工作经历
1986-1999， 航天工业总公司708所，助理工程师、工程师、高级工程师、研究室副主任、研究室总工程师。
1991-1992， 英国威尔士大学Swansea学院访问，访问。
1998-1998， 台湾交通大学应用数学系访问，访问。
1999-2000， 北京兆维电子集团，副总工程师。
2000-2002， 新加坡国立大学工业工程系， Research Fellow
2003-至今， 北京理工大学管理与经济学院，教授。
四、社会兼职
1996-1999，航天可靠性标准化技术委员会：委员、副主任委员；
1997-1999，国防科学技术委员会可靠性标准化委员会：秘书；
1996-1999，中国航天质量与可靠性专家组：成员；
1997-2000，国家（中国）统计方法标准化委员会：委员；
1997-2000，国家（中国）统计方法标准化委员会可靠性分会：主任委员；
2005-2015, IEEE Transactions on Reliability 副主编；
2010-至今，Communications in Statistics---Theory and Methods, Simulation and
Computation副主编；
2013-至今，Quality Technology and Quantative Management 副主编
2017-至今， Reliability：Theory and Applications (electrical Journal) 副主编
2005-2009，中国运筹学会可靠性分会：主任委员；
2009-至今，中国运筹学会可靠性分会：副主任委员；
2009-2017，中国现场统计学会理事；
2009-至今，《数理统计与管理》杂志编委会编委，副主编；
2005-至今，内蒙古科技大学客座教授；
2006-至今，北京市系统工程学会理事；
2006-2009，中国航天科工集团第二研究院产品保证专家支持体系专家组成
员；
2010-至今，中国标准化协会可靠性专业委员会委员；
2010-至今，中国质协第六届学术教育工作委员会委员。
2012-至今，西北工业大学兼职教授，管理科学与工程专业博士学位研究生
指导教师；
2012-至今，中国优选与统筹法与经济数学学会，常务理事，工业工程分会：
理事长；
2012-至今， 中国运筹学会理事。
2017.6-至今，《运筹与管理》编委
2018.9-至今，《系统工程与电子技术》编委

五、近五年来发表的主要论文、书籍章节、期刊及会议文章
论文：
[1] H Yi, Lirong Cui, JY Shen, Y Li, Stochastic properties and reliability measures of discrete-time semi-Markovian systems, Reliability Engineering & System Safety, 2018, 176: 162-173.
[2] QA Qiu, Lirong Cui, JY Shen, Availability and maintenance modeling for systems subject to dependent hard and soft failures, Applied Stochastic Models in Business and Industry, 2018, 34(4): 513-527.
[3] H Yi, Lirong Cui, JY Shen, Multipoint and multi-Interval covering availabilities, IEEE Transactions on Reliability, 2018, 67(2): 666-677.
[4] QA Qiu, Lirong Cui, L Yang, Maintenance policies for energy systems subject to complex failure processes and power purchasing agreement, Computers & Industrial Engineering, 2018, 119: 193-203.
[5] JY Shen, A Elwany, Lirong Cui, Reliability analysis for multi-component systems with degradation interaction and categorized shocks, Applied Mathematical Modelling, 2018, 56: 487-500.
[6] HD Gao, Lirong Cui, DJ Kong, Reliability analysis for a Wiener degradation process model under changing failure thresholds, Reliability Engineering & System Safety, 2018, 171: 1-8.
[7] YC Mo, Lirong Cui, LD Xing, Z Zhang, Performability analysis of large-scale multi-state computing systems, IEEE Transactions on Computers, 2018, 67(1): 59-72.
[8] Lirong Cui, ZL Chen, HD Gao, Reliability for systems with self-healing effect under shock models, Quality Technology and Quantitative Management, 2018, 15(5): 551-567.
[9] Lirong Cui, HD Gao, YC Mo, Reliability for k-out-of-n:F balanced systems with m sectors, IISE Transactions, 2018, 50(5): 381-393.
[10] XJ Jia, Lirong Cui, LD Xing, New insights into reliability problems for supply chains management based on conventional reliability model, Eksploatacja I Niezawodnosc-Maintenance and Reliability, 2018, 20(3): 465-470.
[11] QA Qiu, Lirong Cui, HD Gao, H Li, Optimal allocation of units in sequential probability series systems, Reliability Engineering & System Safety, 2018, 169:351-363.
[12]. DJ Kong, N Balakrishnan, Lirong Cui, Two-Phase Degradation Process Model With Abrupt Jump at Change Point Governed by Wiener Process, IEEE Transactions on Reliability, 2017, 66(4): 1345-1360.
[13] C Lin, Lirong Cui, DW Coit, M Lv, Performance analysis for a wireless sensor network of star topology with random nodes deployment, Wireless Personal Communications, 2017, 97(3): 3393-4013.
[14] Lirong Cui, JH Chen, B Wu, New interval availability indexes for Markov repairable systems, Reliability Engineering & System Safety, 2017, 168:12-17.
[15] QA Qiu, Lirong Cui, JY Shen, L Yang, Optimal maintenance policy considering maintenance errors for systems operating under performance-based contracts, Computers & Industrial Engineering, 2017, 112: 147-155.
[16 JY Shen Lirong Cui, Reliability performance for dynamic multi-state repairable systems with K regimes, IISE Transactions, 2017, 49(9): 911-926.
[17] ZL Chen, R. Pan, Lirong Cui, An economic off-line quality control approach for unstable production processes, Quality Engineering, 2017, 29(4): 623-642.
[18] Yan Li, Lirong Cui, Cong Lin, Modeling and analysis for multi-state systems with discrete-time Markov regime-switching, Reliability Engineering & System Safety, 2017, 166:41-49.
[19] He Yi, Lirong Cui, Distribution and availability for aggregated second-order semi-Markov ternary system with working time omission, Reliability Engineering & System Safety, 2017, 166: 50-60.
[20] Y. C. Mo, L. D. Xing, Lirong Cui, S. B. Si, MDD-based performability analysis of multi-state linear consecutive-k-out-of-n: F systems, Reliability Engineering & System Safety, 2017, 166: 124-131.
[21] DJ Kong, JB Huang, Narayanaswamy Balakrishnan, Lirong Cui, Stochastic quantile-filling augmentation algorithm to censored and accurate reliability data, Computers & Industrial Engineering, 2017, 108: 27-38.
[22] QA Qiu, Lirong Cui, HD Gao, Availability and maintenance modelling for systems subject to multiple failure modes, Computers & Industrial Engineering, 2017, 108: 192-198.
[23] Q. Zhang, Lirong Cui, H. Yi, A study on a single-unit repairable system with working and repair time omission under an alternative renewal process, Proceedings of the Institution of Mechanical Engineers Part O-Journal of Risk and Reliability, 2017, 231(3): 232-241.
[24] Cong Lin, Lirong Cui, David Coit, Min Lv, An approximation method for evaluating the reliability of a dynamic k-out-of-n:F system subjected to cyclic alternating operation conditions, Proceedings of the Institution of Mechanical Engineers Part O-Journal of Risk and Reliability, 2017, 231(2): 109-120.
[25] Dejing Kong, Chengwei Qin, Yong He, Lirong Cui, Sensor-based calibrations to improve reliability of systems subject to multiple dependent competing failure processes, Reliability Engineering & System Safety, 2017, 160: 101-113.
[26] S. J. Du, Z. G. Zeng, Lirong Cui, R. Kang, Reliability analysis of Markov history-dependent repairable systems with neglected failures, Reliability Engineering & System Safety, 2017, 159: 134-142.
[27] Yanqing, Wen, Lirong Cui, Shubin Si, Baoliang Liu, A multiple warm standby delta-shock system with a repairman having multiple vacations, Communications in Statistics-Simulation and Computation, 2017, 46 (4): 3172-3186.
[28] Quan Zhang, Lirong Cui, Dejing Kong, A study on a stochastic process with state classifications based on sojourn times, Quality Technology and Quantitative Management, 2017, 14(2): 214-236.
[29] Dejing Kong, Lirong Cui, The analysis of mixed interval-censored and complete data, Communications in Statistics-Simulation and Computation, 2017, 46(1): 145-163.
[30] Lirong Cui,Yan Li,Jingyuan Shen, Cong Lin, Reliability for discrete state systems with cyclic missions periods, Applied Mathematical Modelling, 2016, 40(23-24): 10783-10799.
[31] Lirong Cui, Quan Zhang, Dejing Kong, Some new concepts and their computational formulae in aggregated stochastic processes with classifications based on sojourn times, Methodology and Computing in Applied Probability, 2016, 18(4): 999-1019.
[32] Yan Li, Lirong Cui, He Yi, Reliability of non-repairable systems with cyclic-mission switching and multimode failure components, Journal of Computational Science, 2016, 17: 126-138.
[33] Yanqing Wen, Lirong Cui, Shubin Si, Baoliang Liu, Several new performance measures for Markov system with stochastic supply patterns and stochastic demand patterns, Journal of Computational Science, 2016, 17: 148-155.
[34] Cong Lin, Lirong Cui, David W. Coit, Min Lv, Reliability modeling on consecutive-k(r)-out-of-n(r):F linear zigzag structure and circular polygon structure, IEEE Transactions on Reliability, 2016, 65(3): 1509-1521.
[35] Lirong Cui, Jinbo Huang, Yan Li, Degradation models with wiener diffusion processes under calibrations, IEEE Transactions on Reliability, 2016, 65(2):613-623.
[36] Yan Liu, Shubin Si, Lirong Cui, Zheng Wang, Shudong Sun, A generalized Griffith importance measure for components with multiple state transitions, IEEE Transactions on Reliability, 2016, 65(2): 662-673.
[37] Hui Dong, Lirong Cui, System reliability under cascading failure model, IEEE Transactions on Reliability, 2016, 65(2): 929-940.
[38] Shijia Du, Lirong Cui, Cong Lin, Some reliability indexes and sojourn time distributions for a repairable degradation model, Proceedings of the Institution of Mechanical Engineers Part O-Journal of Risk and Reliability, 2016, 230 (3): 334-349.
[39] Jingyuan Shen, Lirong Cui, Reliability performance for dynamic systems with cycles of K regimes. IIE TRANSACTIONS. 2016, 48 (4): 389-402.
[40] Lirong Cui, Dejing Kong, Haijun Li, Matching via majorization for consistency of product quality, Quality Technology and Quantitative Management, 2016, 13(4):439-452.
[41] Liying Wang, Lirong Cui, Jie Zhang, Jing Peng, Reliability evaluation of a Semi-Markov repairable system under alternative environments, Communications in Statistics - Theory and Methods, 2016, 45(10):2938-2957.
[42] Shijia Du, Cong Lin, Lirong Cui, Reliabilities of a single-unit system with multi-phased missions, Communications in Statistics - Theory and Methods, 2016, 45(9):2524-2537.
[43] Fangyu Liu, Lirong Cui, A Design of attributes double sampling plans for three-class products. Communications in Statistics - Simulation and Computation, 2016, 45(3):1054-1071.
[44] Baoliang Liu, Lirong Cui, Yanqing Wen, Furi Guo, A cold standby repairable system with the repairman having multiple vacations and operational, repair, and vacation times following phase-type distributions, Communications in Statistics - Theory and Methods, 2016, 45(4):850-858.
[45] Mansoor Khan, Lirong Cui, Memory based scheme to monitor non-random small shift patterns in manufacturing process, Journal of Shanghai Jiaotong University (Science), 2016, 21(4):509-512.
[46] Jinbo Huang, Dejing Kong, Lirong Cui, Bayesian reliability assessment and degradation modeling with calibrations and random failure threshold , Journal of Shanghai Jiaotong University (Science), 2016, 21(4):478-483.
[47] Dejing Kong, Lirong Cui. Bayesian inference of multi-stage reliability for degradation systems with calibrations. Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability. 2016, 230（1）：18-33.
[48] Baoliang Liu, Lirong Cui, Yanqing Wen, Jingyuan Shen, A cold standby repairable system with working vacations and vacation interruption following Markovian arrival process. Reliability Engineering & System Safety. 2015, 142: 1-8.
[49] Dejing Kong, Lirong Cui, Xibin Zhao, The Analysis of Alternative Interval-Censored and Complete Data. Quality Technology And Quantitative Management. 2015, 12 (4): 537-560.
[50] Jingyuan Shen, Lirong Cui, Reliability and Birnbaum Importance for Sparsely Connected Circular Consecutive-k Systems. IEEE Transactions On Reliability. 2015, 64 (3): 1140-1157.
[51] Baoliang Liu, Lirong Cui, Yanqing Wen, Cold standby repairable system with working vacations and vacation interruption, Journal of Systems Engineering and Electronics, 2015, 26(5):1127-1134.
[52] Jingyuan Shen, Lirong Cui and Shijia Du, Birnbaum importance for linear consecutive-k-out-of-n system-s with sparse d, IEEE Transactions on Reliability, 2015, 64(1): 359-375.
[53] Lirong Cui, Cong Lin and Shijia Du, m-consecutive-k, l-out-of-n system, IEEE Transactions on Reliability, 2015, 64(1): 386-393.
[54] Dui Hongyan, Si Shubi, Cui Lirong, Cai Zhiqiang, Sun Shudong, Component importance for multi-state system lifetimes with renewal functions, IEEE Transactions on Reliability, vol. 63, no. 1, pp. 105-117, 2014.
[55] Baoliang Liu, Lirong Cui, Yanqing Wen, Interval reliability for aggregated Markov repairable system with repair time omission, Annals of Operations Research, vol. 212, no. 1, pp.169-183, 2014.
[56] Shijia Du, Cong Lin and Lirong Cui, Reliabilities of a single-unit system with multi-phased missions, Communications in Statistics – Theory and Methods, 2014, DOI: 10.1080/**.2014.882953.
[57] Baoliang Liu, Lirong Cui, Yanqing Wen and Jingyuan Shen, A performance measure for Markov system with stochastic supply patterns and stochastic demand patterns, Reliability Engineering & System Safety, vol. 119, no. pp300-307, 2013.
[58] Lirong Cui , Shijia Du and Baoliang Liu, Multi-point and multi-interval availabilities, IEEE Transactions on Reliability, vol. 62, no. 4, pp.811-820, 2013.
[59] Shijia Du, Lirong Cui, Haijun Li and Xibin Zhao, A study on joint availability for k out of n and consecutive k out of n points and intervals, Quality Technology and Quantitative Management, vol. 10, no. 2, pp. 179-191, 2013.
[60] Fangyu Liu, Lirong Cui, A design of attributes single sampling plans for three-class products, Quality Technology and Quantitative Management, vol. 10, no.4, pp. 367-387, 2013.
[61] Liying Wang, Lirong Cui, Performance evaluation of aggregated Markov repairable systems with multi-operating levels, Asia-Pacific Journal of Operational Research, vol. 30, no.4, pp. 1-27, 2013.
[62] Wang J B, Wang J Y, Chen M, Zhao X B, Si S B; Lirong Cui, Cao L L, Xu R H, Reliability analysis for a data flow in event-driven wireless sensor networks using a multiple sending transmission approach, Eurasip Journal on wireless communications and networking, no. 277, Publication: DEC. 5, 2013.
[63] Xiaofang Dong, Lirong Cui and Fangyu Liu, A further study on reliable life estimation under ranked set sampling, Communications In Statistics-Theory and Methods, vol. 41, no.21, pp. 3888-3902, 2012.
[64] Xinzhuo Bao, Lirong Cui, A Study on Reliability for a two-item cold standby Markov repairable system with neglected failures, Communications in Statistics-Theory and Methods, vol. 41 no.21, pp. 3988-3999, 2012.
[65] Xujie Jia, Lirong Cui, Reliability research of k-out-of-n: G supply chain system based on Copula, Communications in Statistics-Theory and Methods, vol. 41, no.21, pp. 4023-4033, 2012.
[66] Lirong Cui, Shijia Du and Alan G. Hawkes, A study on a single-unit repairable system with state aggregations, IIE Transactions, vol. 44, no.11, pp. 1022-1032, 2012.
书籍章节
[1] Alan. G. Hawkes, Lirong Cui & Shijia Du, Chapter16. Occupancy Times for Markov and Semi-Markov Models in Systems, Reliability Applied Reliability Engineering and Risk Analysis: Probabilistic Models and Statistical Inference, John Wiley & Sons, 2014, pp.218-230.
[2] Lirong Cui, Cong Lin & Haisheng Yang, Analysis for a Qualification Test Procedure with FMCIA (Finite Markov Chain Imbedding Approach), Chapter 1, Mathematics Applied to Engineering, 2017.
[3] H. Yi, Lirong Cui, A study on repairable series systems with Markov repairable units, Recent Advances in Multi-state Systems Reliability---Theory and Applications, Springer, 2018, p121-157.
[4] 崔利荣，赵先、刘芳宇，质量管理学，人民大学出版社，2012。
六、近五年来所获奖励
[1] 2005年获得教育部新世纪优秀人才支持计划。
[2] 2006年荣获北京理工大学优秀硕士学位论文指导教师证书(郑治华)。
[3] 2009年荣获北京理工大学优秀博士学位论文指导教师证书（赵先）。
[4] 2009年荣获（香港）IEEM2009国际会议优秀论文奖（孙青）。
[5] 2009年荣获北京市优秀博士学位论文指导教师证书（赵先）。
[6] 2011年荣获北京理工大学优秀硕士学位论文指导教师证书（解伟娟）。
[7] 2013年荣获北京理工大学优秀博士学位论文指导教师证书（董晓芳）。
[8] 2015年荣获北京理工大学优秀博士学位论文指导教师证书（刘宝亮）。
[9] 2017年荣获北京理工大学优秀博士学位论文指导教师证书（孔德景）。
[10] 2018年荣获北京理工大学优秀博士学位论文指导教师证书（沈静远）
七、近五年来主持的科研和咨询项目
主持完成了4项国家自然基金，正在主持2项国家自然基金（1项重点）：
[1]. 2004.1-2006.12. 系统可靠性的一些问题探讨 （**），已结题，评审：优秀；
[2]. 2007.1-2009.12. 聚合随机过程维修性模型与分析(**),已结题，评审: 良；
[3]. 2011.1-2013.12. 状态聚合模式的衍生维修性建模及相关问题研究，（**），已结题，评审：优秀；
[4]. 2014.1-2017.12. 复杂随机动态系统可靠性建模与分析 （**）
[5]. 2017.1-2021.12. 系统可靠性建模与分析的理论与方法研究 （**） （重点项目）
[6]. 2019.1-2022.12. 系统故障自愈与部件故障相互影响的随机过程建模与分析（**）
[7]. 2011.1-2013.12．主持博士点基金项目：质量多等级产品计数抽样理论与方法研究。
[8]. 2010.1-2011.12. 主持北京市教育委员会项目：网络系统可靠性优化设计与评估研究
[9]. 主持完成或正在进行的多项横向课题。
八、近五年参加的国内外学术会议及其他专业相关会议
[1] International Conference on Risk and Reliability Management, Beijing, Oct. 23-24, 2010, (大会发言) Technical Program Committee member.
[2] The 4th Asian-Pacific International Symposium on Advanced Reliability and Maintenance Modeling (APARM2010), Wellingtong, New Zealand, Dec. 2-4,2010. Technical Program Committee Co-Chair.
[3] 2010 International Conference on Risk and Reliability Management, 2010, October 23-25, Beijing, (大会发言).
[4] The 7th International Conference on“Methematical Methods in Reliability”: Theory. Methods. Applications. (MMR2011), Beijing, June 20-24, 2011. Technical Program Committee Co-Chair.
[5] The 9th International Conference on Reliability, Maintainability and Safety（ICRMS'2011） June 12-15, 2011,GUIYANG·CHINA, Program Committee Co-Chair.
[6] 2012 Asia-Pacific International Symposium on Advanced Reliability and Maintenance Modeling (APARM 2012), Nanjing, China, November 1-3, 2012, Conference General Co-Chairs.
[7] 2013 The Seventh International Conference on Mathematical Methods in Reliability， Theory. Methods., Applications (Technical Program Committee member, Session-Chairs) (Cape Town).
[8] International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE 2014)， July， 22-25， Dalian， China， Keynote speaker (大会发言).
[9] International Workshop on Applied Probability, June 16-19, 2014, Antalya, Turkey, Invited speaker,
[10] 2014 Asia-Pacific International Symposium on Advanced Reliability and Maintenance Modeling (APARM 2014), Sapporo, Japan, August 20-23, 2014, Program Co-Chair.
[11] The 8th International Conference on Modelling in Industrial Maintenance and Reliability (MIMAR 2014), Oxford, UK., Technical Program Committee member.
[12] International Applied reliability Symposium, Shanghai, China, November, 5-6, 2014， Plenary speaker.
[13] The workshop on reliability, 2015, April 7, Plenary talk, Beijing university of Science and Technology.
[14] International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE 2015), July, Beijing, China, Program Co-Chair.
[15] 国家自然基金委双清论坛第123期，合肥，10月22-24，2014，小组发言。
[16] The 9th International Conference on “Methematical Methods in Reliability”: Theory. Methods. Applications. (MMR2015), Tokyo, June 1-4, 2015. Invited speaker.
[17] Second International Symposium on Stochastic Models in Reliability Engineering, Life Science and Operations Management (SMRLO’16), February 15-18, 2016, Beer Sheva, Israel, PC member.
[18] 2nd International Conference on Mathematical Techniques in Engineering Applications (ICMTEA2016), April, 29-30, 2016. India, Session/Keynote Speaker.
[19] 第五届全国可信计算学术会议（CDC2015），大会发言，2015年10月9-10日，浙江省金华市（浙江师范大学）。
[20] International Workshop on Mathematical Reliability and Safety, 2016.6.23-2016.6.25, 中国徐州，大会发言。
[21] The 1^st Sino-US Research Conference on Quality, Analytics and Innovation
July 1-2, Shanghai, China, (Plenary talk)
[22] The 7th Asia-Pacific International Symposium on Advanced Reliability and Maintenance Modeling, 2016.8.23-2016.8.27, Soule, Korea, Program Member,
[23] International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering, 2016.7.25-2016.7.28, Jiuzhaigou, Sichuan, China, Gou Si Chuan, Program Co-Chair.
[24] 中国运筹学会第十次全国代表大会暨2016年学术交流年会2016.10.14-2016.10.16, 云南昆明，分会场发言.
[25] The International Applied Reliability Symposium (ARS) --- 2016.11.16 -- 2016.11.18, Shenzhen, Guangdong, China, Plenary talk.
[26] 中国第一届质量可靠性青年学术论坛, 2016.12.14-2016.12.15, 湖南长沙，会议主席.
[27] 中国运筹学会可靠性分会青年学术会议, 2016.12.16-2016.12.18, 湖南长沙，会议主席。
[28] 中国运筹学会可靠性分会年会， 2017.4.23-24，北京交通大学， 大会发言，
[29] 系统可靠性及维修性学术研讨会(西北工业大学)，2017,6.12-14. 大会发言。
[30] The 10th International Conference on Mathematical Methods in Reliability (MMR 2017), Grenoble, France, 2017, July3-6, PC member, Invited talk.
[31] The 2017 IEEE International Conference on Software Quality, Reliability & Security (QRS2017), 2017, July 26-28, Prague, Czech, (Workshop on Reliability Modeling and Optimization, Chair, Session Chair).
[32] “新兴信息技术环境下重大装备制造全生命周期管理理论、方法与应用研究”研讨会, 大会发言， 2017年8月31日。合肥（合肥工业大学）
[33] 第二届（2017年）中国质量与可靠性管理青年论坛，西安2017年11月24-26日。（主持2个大会报告）
[34] 中国优选法统筹法与经济数学研究会工业工程分会年会， 2017年12月1-2日， 北京。（主持会议）
[35] 8th Asia-Pacific International Symposium on Advanced Reliability and Maintenance Modeling (APARM 2018) & 8th International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE 2018), Program Co-Chair. Qingdao, Shandong, China, August 21-24, 2018.
[36] 2018 International Conference on Management and Operations research, July 7-9, 2018, Beijing, China. PC member.
[37] Applied Reliability and Durability conference, 2018年8月15-17日，上海， 大会报告。
[38] 2018年可靠性青年学术研讨会， 2018年8月24日，青岛，大会特邀报告。
九、近五年参加的国内外学术期刊活动
Guest editors:
[1] 2011, IEEE Transactions on Reliability, Special Section on MMR2011.
[2] 2011, Communications in Statistics---Theory and Methods, Special Issue on MMR2011.
[3] 2011, Annals of Operations Research, Special Volume: Stochastic Methods in Reliability and Risk Management.
[4] 2012, An International Journal Quality Technology & Quantitative Management, Special issue on Reliability Modeling, Inference and Analysis.
[5] 2012,Communications In Statistics-Theory And Methods, for Special Issue on APARM 2012.
十、学术家谱
(1) Professor M.S. Bartlett (University of Oxford , UK, Elected to NAS: 1993), he was Alan G Hawkes’ PhD supervisor;
(2) Professor Alan G. Hawkes, he was Lirong Cui’s PhD supervisor. (School of Business and Economics, University of Wales, Swansea, UK. Emeritus professor of statistics. Stochastic modelling, Hawkes process, Ion-channel, APL.)