周小宾
博士，讲师
办公地点：冶金楼南222
办公电话：**
传真：**
电子邮件：xiaobinz@kth.se




科研方向： （1）转炉的结构优化
（2）转炉的物理与数值模拟
（3）两相流中气泡与液体相互作用机理模拟
（4）结晶器，中间包和钢包的结构优化研究
简历：
2009年毕业于太原理工大学冶金工程专业（学士），2011年获得东北大学钢铁冶金专业硕士学位，2015年获得瑞典皇家理工应用过程冶金专业博士学位。自2016年9月起进入安徽工业大学冶金工程学院冶金工程系从事钢铁冶金的教学研究工作。
论文：
[1]Xiaobin ZHOU,Mikael ERSSON, Liangcai ZHONG, Jingkun YU, Pär JÖNSSONMathematical and PhysicalSimulation of a Top Blown Converter, Steel research int. 85 (2014) No.2（SCI）
[2]Xiaobin ZHOU, MikaelERSSON,Liangcai ZHONG, Pär JÖNSSON, Optimization of the Combined BlownConverter Process, ISIJ Int.54 (2014) No.10（SCI）
[3]Xiaobin ZHOU,Mikael ERSSON, Liangcai ZHONG, Pär JÖNSSON, Numerical and Physical Simulationsof a Combined Top-Bottom-Side Blown Converter, Steelresearch int. 86 (2015) No.11（SCI）
[4]Xiaobin ZHOU, MikaelERSSON, Liangcai ZHONG, Pär JÖNSSON, Numericalsimulations of the kineticenergy transfer in the bath of a BOF Converter, Metallurgicaland Materials Transactions B,47 (2015) No.1.（SCI）
[5]LiangcaiZHONG,*, Xiaobin ZHOU, Yingxiong ZHU, Boyu CHEN, Biaocai HUANG andJianxiang KE, IndustrialExperiment of Steelmaking in a Top-Bottom-Side BlownConverter with Slag Splashing Process, Steel research int. 83 (2012) No.1（SCI）
[6]Xiaobin ZHOU,Mikael ERSSON, Pär JÖNSSON, An analysis of a converter based on modelling, The1st European Steel Technology and Application Days & 31st Join New EuropeanSteel Industry Conference (1st ESTED & 31st JSI2014), Paris, France; April7-8, 2014
[7]Xiaobin ZHOU,Mikael ERSSON, Pär JÖNSSON, Simulation of the influence of side-blowing on thestirring in the top-bottom-side blown converter, The 7th European OxygenSteelmaking Conference (EOSC2014), T?inec, Czech Republic, September 9-11, 2014
[8]Xiaobin ZHOU,Mikael ERSSON, Liangcai ZHONG, Pär JÖNSSON, A numerical study of mixingbehavior in the bath of a converter, The 6th International Congress on theScience and Technology of Steelmaking (ICS2015), Beijing, China, May 12-14,2015.